Accession Number : AD0626375

Title :   PRODUCTION ENGINEERING MEASURE. POLYCARBONATE PLASTIC FILM.

Descriptive Note : Quarterly rept. no. 2, 18 Aug-18 Nov 65.

Corporate Author : GENERAL ELECTRIC CO HUDSON FALLS N Y CAPACITOR DEPT

Report Date : 18 NOV 1965

Pagination or Media Count : 26

Abstract : The extrusion equipment was completely set up and debugged for film operation, returning to the baseline conditions established previously. The manual feed system was evaluated and set up in a manner that eliminates moisture streaks. The biaxial orientation equipment was installed and mechanically debugged. The extrusion conditions for producing non-textured poly-carbonate film were optimized, and a series of 24-hour runs was made producing 2000 pounds of 0.4 mil and 1000 pounds of 0.5 mil film. (Author)

Descriptors :   (*POLYESTER PLASTICS, DIELECTRIC FILMS), (*DIELECTRIC FILMS, POLYESTER PLASTICS), MANUFACTURING, DIELECTRIC PROPERTIES, EXTRUSION, THICKNESS, TENSILE PROPERTIES, FRICTION, FINISHES, SURFACE PROPERTIES, FILMS

Subject Categories : Electrical and Electronic Equipment
      Plastics

Distribution Statement : APPROVED FOR PUBLIC RELEASE