Accession Number : AD0637831

Title :   INTERCONNECTING TECHNIQUES FOR TELEPHONE COMMUNICATION EQUIPMENT.

Descriptive Note : Final rept., 20 Jun 62-30 Dec 65.

Corporate Author : BURNDY CORP NORWALK CONN

Personal Author(s) : Stelling,Richard P. ; Auriana,Mark

Report Date : JUN 1966

Pagination or Media Count : 122

Abstract : The objective of this work was to develop electrical connectors for use with flat flexible cable. Plug and receptacle type connectors and adapters for hermetic feed thru and printed circuit board applications were required. The first phase of this work was the evaluation of three methods of contacting the conductors of the cable without stripping the insulation. Insulation piercing sawtooth contacts that make a sliding siping contact were selected. The second phase resulted in development models of a plug, Hermetic feed thru, and ultra-miniature printed circuit connector adapter. These models were laboratory tested to ascertain electrical capabilities; favorable results were recorded. The design and manufacture of Engineering models constituted the third phase of the work. The design consists of molded plastic inserts within non-magnetic metal housings and sawtooth type contacts to pierce the cable insulation as in the development models. Considerable difficulty was encountered in attempting a hermetic seal of 0.016 diameter pins on 0.050 inch centers. Testing of many materials resulted in the selection of molybdenum for the pins. The final phase was the evaluation of the Engineering Models. Qualification tests were performed to the proposed specification. These tests indicated good electrical qualities, but some problems in the areas of environmental sealing and alignment of contacts for closed entry purposes. (Author)

Descriptors :   (*ELECTRIC CONNECTORS, *TELEPHONE EQUIPMENT), (*ELECTRIC CABLES, ELECTRIC CONNECTORS), MINIATURE ELECTRONIC EQUIPMENT, PRINTED CIRCUITS, HERMETIC SEALS, EXPERIMENTAL DESIGN, PERFORMANCE(ENGINEERING), MOLYBDENUM, PINS

Subject Categories : Electrical and Electronic Equipment
      Non-radio Communications

Distribution Statement : APPROVED FOR PUBLIC RELEASE