Accession Number : AD0723939

Title :   Low-Water Weirs on Boeuf and Tensas Rivers, Bayou Macon, and Big and Colewa Creeks, Arkansas and Louisana; Hydraulic Model Investigation.

Descriptive Note : Final rept. Jul 67-Jan 68,

Corporate Author : ARMY ENGINEER WATERWAYS EXPERIMENT STATION VICKSBURG MISS

Personal Author(s) : Ables,Jackson H. , Jr. ; Boyd,Marden B.

Report Date : OCT 1969

Pagination or Media Count : 44

Abstract : A 1:20-scale model reproducing one-half of the channel section through a low-water weir was used to test eight plans of channel improvement. The tests were conducted with a drop height of 5.5 ft, and discharges up to 10,000 cfs were observed. Flow conditions and slope protection downstream from the weir to control the flanking problem were found to be satisfactory with channel improvement plans 6 and 8. Riprap with an average weight of 33 lb was used in slope protection in both plans. A model headwater-tailwater rating curve was obtained. A second 1:20-scale section model was constructed in a 2.5-ft-wide glass flume for more generalized riprap tests in the vicinity of the structure. Several drop structure plans were observed to develop an effective, economical drop structure. Of primary concern were development of some of the dimensions of various elements of the structure and determination of riprap requirements in the vicinity of the structure. Limiting tailwater curves for 220- and 325-lb riprap are furnished as a guide in riprap selection at drop structures with drop heights of from 5 to 10 ft. Suggestions as to the use of these curves also are included. A basin length of 20 ft is considered to be adequate at projects where the jet will ride through at unit discharges exceeding about 10 cfs. A riprap plan which provides additional protection to the structure is presented in Appendix A. (Author)

Descriptors :   (*DAMS, *HYDRAULIC MODELS), (*INLAND WATERWAYS, CIVIL ENGINEERING), RIVERS, CONSTRUCTION, RIVER CURRENTS, FLUID FLOW, CONSTRUCTION MATERIALS, TEST METHODS, ARKANSAS, LOUISIANA

Subject Categories : Hydrology, Limnology and Potamology
      Civil Engineering

Distribution Statement : APPROVED FOR PUBLIC RELEASE