Accession Number : AD0759411
Title : Residual Stresses in Machined Magnesium Oxide Crystals.
Descriptive Note : Technical rept.,
Corporate Author : HONEYWELL INC BLOOMINGTON MINN CORPORATE RESEARCH CENTER
Personal Author(s) : Bernal G.,Enrique ; Koepke,Barry G.
Report Date : APR 1973
Pagination or Media Count : 33
Abstract : The residual stresses introduced in magnesium oxide crystals by grinding on (100) surfaces in <100> directions were measured using photoelastic techniques. Grinding was carried out with two wheels, one removed material by brittle fracture and the other by plastic flow and burnishing. Both wheels introduced a discrete, highly deformed layer adjacent to the machined surface. In all cases the machined surfaces were under a residual tensile stress which reversed and became compressive within the deformed region. Beneath the deformed layer the residual stress patterns were distinctly different. In crystals ground with the alumina wheel, the stresses reversed again and became tensile within 0.5 mm of the ground surface whereas the subsurface stresses in crystals ground with the diamond wheel remained compressive to distances of 1mm or greater. These different residual stress distributions are discussed in terms of a simple model based on the superposition of mechanically and thermally induced stresses. (Author)
Descriptors : (*MAGNESIUM OXIDES, STRESSES), (*CERAMIC MATERIALS, *MACHINING), SURFACES, GRINDING, DEFORMATION, DISLOCATIONS, PHOTOELASTICITY, OPTICAL PROPERTIES, BIREFRINGENCE
Subject Categories : Ceramics, Refractories and Glass
Distribution Statement : APPROVED FOR PUBLIC RELEASE