Accession Number : AD0915701
Title : Brassboard Laser Transmitter.
Descriptive Note : Final technical rept. 25 Sep 72-24 Jul 73,
Corporate Author : GTE GOVERNMENT SYSTEMS CORP MOUNTAIN VIEW CA SYLVANIA SYSTEMS GROUP-WESTERN D IV
Personal Author(s) : Reynolds, Richard S.
Report Date : DEC 1973
Pagination or Media Count : 120
Abstract : This report describes the efforts on a 10 month program whose objective was the design, development and delivery of a mode-locked internally frequency doubled Nd:YAG laser operating at 500 MHz prf with an average output power of 250 mW at 0.53 micrometers or 1.0W at 1.06 micrometers (TEM (Sub oo) mode) with a pulse width of less than 300 ps (measured at 10% amplitude points). Further constraints were that the laser be conduction cooled and the maximum power into the pump lamp be 250W. The approach utilized a 4 mm bore diameter, protected end seal Potassium-Rubidium (K-Rb) lamp as a pump source in a cold mirror pump cavity with a 3 mm diameter by 54.5 mm long rod conductively cooled with heat pipes. A three mirror L shaped resonator was used to allow efficient coherent combination of the two green beams generated in a 5 mm cube Barium-Sodium-Niobate (BSN) crystal. The internal 1.06 micrometers beam was focused into the doubling crystal with a 7.5 cm focal length lens. Modelocking at the cavity c/2L frequency was achieved with both an acousto-optic modulator and an electro-optic modulator. The doubler crystal served as the electro-optic modulator material. During the program, it was determined that great enough mode-locking depth was not available from state-of-the-art mode-lockers to allow for short pulses simultaneously with high conversion rate to the green.
Descriptors : (*LASERS, TRANSMITTERS), (*LASER COMMUNICATIONS, OPTICAL COMMUNICATIONS), OPTICAL PUMPING, NEODYMIUM LASERS, YTTRIUM ALUMINUM GARNET, MIRRORS, ELECTROOPTICS, ACOUSTOOPTICS, MODULATORS, BRASSBOARD MODELS, INSERTION LOSS, RESONATORS, LAMPS, METAL VAPORS, CRYSTALS, HEAT PIPES, BARIUM COMPOUNDS, NIOBATES, SODIUM COMPOUNDS, SPECIFICATIONS.
Subject Categories : Lasers and Masers
Distribution Statement : APPROVED FOR PUBLIC RELEASE