Accession Number : ADA133806

Title :   Injection, Atomization, Ignition and Combustion of Liquid Fuels in High-Speed Air Streams.

Descriptive Note : Annual scientific rept. 1 Dec 81-31 Dec 82,

Corporate Author : VIRGINIA POLYTECHNIC INST AND STATE UNIV BLACKSBURG DEPT OF AEROSPACE AND OCEAN ENGINEERING

Personal Author(s) : Schetz,Joseph A

PDF Url : ADA133806

Report Date : Jan 1983

Pagination or Media Count : 19

Abstract : A simulation approach to studying hot flow subsonic cross-stream fuel injection problems in a less complex and costly cold flow facility was developed. A typical ramjet combustion chamber fuel injection problem was posed where ambient temperature fuel (Kerosene) is injected into a hot airstream. This case was transformed through two new similarity parameters involving injection and freestream properties to a simulated case where a chilled injectant is injected into an ambient temperature airstream. Experiments for the simulated case using chilled Freon-12 injected into the Va. Tech 23 x 23 cm. blow-down wind tunnel at a freestream Mach number of 0.44 were run. The freestream stagnation pressure and temperature were held at 2.5 atm. and 300 degrees K respectively. Results showed a clear picture of the mechanisms of jet decomposition in the presence of rapid vaporization. Immediately after injection a vapor cloud was formed in the jet plume, which dissipated downstream leaving droplets on the order of 8 to 10 microns in diameter for the conditions examined. This represents a substantial reduction compared to baseline tests run at the same conditions with water which had litte vaporization. The desirability of using slurry fuels for aerospace application has long been recognized, but the problems of slurry combustion have delayed their use. The present work is an experimental and numerical investigation into the break-up and droplet formation of laminar slurry jets issuing into quiescent air.

Descriptors :   *Jet flow, *Fuel injection, *Simulation, Cross flow, Sprays, Drops, Vaporization, Plumes, Transverse, Kerosene, Atomization, Air flow, Subsonic flow, Free stream, Flow rate, Ignition, Combustion, Wind tunnel tests, Experimental design, Slurry fuels, Cooling, Vapor pressure, Ramjet engines

Subject Categories : Test Facilities, Equipment and Methods
      Combustion and Ignition

Distribution Statement : APPROVED FOR PUBLIC RELEASE