Accession Number : ADA297301
Title : Shielding Effectiveness Test Report for a Ti-Shield (Trademark) Enclosure.
Descriptive Note : Final rept. 1 Dec 94-1 Feb 95,
Corporate Author : ARMY RESEARCH LAB ADELPHI MD
Personal Author(s) : Coburn, William O. ; Reiff, Christian G. ; Albright, Linden ; Mauroni, Albert
PDF Url : ADA297301
Report Date : JUL 1995
Pagination or Media Count : 18
Abstract : An electromagnetic (EM) shielding effectiveness test was conducted to evaluate the performance of 10-mil-thick TI-Shield applied to an Army tactical shelter. TI-Shield is a clad metal composite of copper/alloy49/copper which is typically available bonded to 1/4-in. particle board. Gaven Industries installed the TI-Shield panels to the interior of a plywood shelter mockup using continuously soldered seams. This shielded enclosure was then tested according to IEEE-STD-299-1991, with some modifications. The shelter mockup and EM testing are discussed with the results presented as recommended by the standard. These results demonstrate that application of TI-Shield to a shelter would satisfy the EM shielding requirement of MlL-STD-907B. (MM)
Descriptors : *ELECTROMAGNETIC SHIELDING, *ELECTROMAGNETIC PULSES, TEST AND EVALUATION, REQUIREMENTS, METALS, SURVIVABILITY, MODELS, COMPOSITE MATERIALS, SHELTERS, COMPOSITE STRUCTURES, ALLOYS, ELECTROMAGNETIC RADIATION, GROUND VEHICLES, SHIELDING, CALIBRATION, ARMY, PLYWOOD, CLADDING, SOLDERING, COMPOSITION BOARD.
Subject Categories : Electromagnetic Shielding
Laminates and Composite Materials
Distribution Statement : APPROVED FOR PUBLIC RELEASE