Accession Number : ADA303330
Title : Outdoor Performance of Plastics. 2. Tensile and Flexural Properties.
Corporate Author : NATIONAL BUREAU OF STANDARDS GAITHERSBURG MD
Personal Author(s) : Clark, Joseph E. ; Fulmer, Glenn E. ; Neuman, Richard C. ; Slater, James A.
PDF Url : ADA303330
Report Date : 18 MAR 1969
Pagination or Media Count : 60
Abstract : This is the second in a series of reports on outdoor performance of 20 plastics. Computer-aided analysis of tensile and flexural strength data is presented for 24-months exposure in Arizona, Florida and Washington, D. C. Ultimate elongation (tensile) and 5% stress (flexural) showed the greatest change of 11 parameters investigated. These changes characterized loss of elasticity and flexibility. Because of the exponential nature of the deterioration, an objective critical failure-point was defined, by which most of the change had occurred. This is reached at 36.8% retention of initial property-value. Classification systems were useful for quantitatively distinguishing physical performance. Generally, samples performed worst in Arizona and best in Washington, D. C. Actinic radiation and heat thus appear to be primary agents causing physical degradation. jg
Descriptors : *PERFORMANCE TESTS, *TENSILE PROPERTIES, *PLASTICS, *FLEXURAL PROPERTIES, *OUTDOOR, STRESSES, DEGRADATION, PHYSICAL PROPERTIES, ELASTIC PROPERTIES, FLEXURAL STRENGTH, CLASSIFICATION, ARIZONA, LOSSES, HEAT, COMPUTER AIDED DIAGNOSIS, DETERIORATION, ELONGATION, FLORIDA.
Subject Categories : Plastics
Distribution Statement : APPROVED FOR PUBLIC RELEASE