Accession Number : ADA324979
Title : New Fabrication Strategies for Polymer Electrolyte Batteries.
Descriptive Note : Final rept.,
Corporate Author : NORTHWESTERN UNIV EVANSTON IL DEPT OF CHEMISTRY
Personal Author(s) : Shriver, D. F. ; Vaynman, S.
PDF Url : ADA324979
Report Date : MAY 1997
Pagination or Media Count : 28
Abstract : The current approaches to the fabrication of solid state lithium cells are based on mechanically joining discrete layers of electrodes and electrolytes. The individual layers are typically produced by a variety of processing techniques. Lithium foil is produced by rolling, and polymer electrolytes and anode films are often formed by doctor blade methods. The films are then laminated together and sealed in an air tight case. Lithium is sensitive to oxygen, nitrogen and moisture, so considerable care is necessary to exclude these contaminants in the fabrication process. The objective of this research was to fabricate lithium-polymer batteries by techniques that may produce a thin electrolyte and cathode films and with minimal contamination during fabrication. One such technique, ultrasonic spray was used. Another objective of this research was to test lithium cells that incorporate the new polymer electrolytes and polyelectrolytes.
Descriptors : *FABRICATION, *LITHIUM BATTERIES, POLYELECTROLYTES, THINNESS, FOILS(MATERIALS), SEALED SYSTEMS, LITHIUM ALLOYS.
Subject Categories : Electrochemical Energy Storage
Mfg & Industrial Eng & Control of Product Sys
Distribution Statement : APPROVED FOR PUBLIC RELEASE