Accession Number : ADA329843

Title :   Computer Automated Chamber Test System.

Descriptive Note : Final rept.,

Corporate Author : ARMY ENGINEER WATERWAYS EXPERIMENT STATION VICKSBURG MS GEOTECHNICAL LAB

Personal Author(s) : Gilbert, Paul A. ; Jobe, Terry V.

PDF Url : ADA329843

Report Date : AUG 1997

Pagination or Media Count : 99

Abstract : Equipment for performing computer-automated chamber tests (such as triaxial compression tests) was developed in this investigation, including a valve that responds to computer-generated binary signals. In a chamber test, a soil specimen is enclosed in a rubber membrane and subjected to hydrostatic and deviatoric stress under conditions of controlled drainage. After a test specimen is set up inside a pressure chamber and all appropriate test parameters are input into the computer code, the controlling software takes over the test and executes all subsequent activities, including back-pressure saturation, Skempton's B-parameter checks, consolidation, and shear, without further assistance from the operator. Data is acquired, manipulated, and stored during test performance for use in decision making during the test and for plotting and display after the test. In this way operator influence and human error are removed. A consolidated-undrained triaxial test was performed on plastic clay to demonstrate the efficacy of the system and the results discussed. Although not included in the software for performing "routine" tests, procedures were developed and presented in detail for performing tests on partially saturated soil based on measurement of pore air pressure during shear.

Descriptors :   *SOIL TESTS, *TRIAXIAL STRESSES, COMPUTER PROGRAMS, SATURATED SOILS, ACOUSTIC MEASUREMENT, PLASTIC PROPERTIES, DIAGNOSTIC EQUIPMENT, COMPUTER AIDED INSTRUCTION, CLAYEY SOILS, MEASURE THEORY.

Subject Categories : Soil Mechanics

Distribution Statement : APPROVED FOR PUBLIC RELEASE