Accession Number : ADA954285

Title :   Metallurgical Examination of a Face Hardened and a Homogeneous 2 Inch Experimental Armor Plate,

Corporate Author : WATERTOWN ARSENAL MA

Personal Author(s) : Reed,E. I. ; Kruegel,S. I.

Report Date : 10 JUL 1941

Pagination or Media Count : 24

Abstract : The purpose of this investigation was to determine the difference in metallurgical properties of a homogeneous plate and a carburized plate, each 2 inch thick and rolled from the same experimental heat. The carburized plate failed on ballistic testing because of a large back spall approximately 6 in x 7 in size. In addition, the ballistic limit of the ductile homogeneous plate was 68 ft/sec higher than the carburized plate. Lt. Col. S.B. Ritchie, who witnesses the ballistic testing of these plates at Aberdeen Proving Ground, suggested that they be sent to Watertown Arsenal for metallurgical examination. The representative of Henry Disston & Sons, Inc. (manufactures of the plate) concurring with this suggestion, forwarded 12 in x 12 in sections cut from each of the plates to Watertown Arsenal for study.

Descriptors :   ARMOR PLATE, BALLISTICS, CUTTING, LIMITATIONS, METALLURGY, TEST METHODS

Subject Categories : Metallurgy and Metallography
      Ballistics

Distribution Statement : APPROVED FOR PUBLIC RELEASE